background image

 Conrad-Johnson LP260m mono-

block power amplifier Owner’s Manual

2

Limited Warranty For Conrad-Johnson Components

Conrad-Johnson Design, Inc. will provide service under warranty to
the original owner on products sold new in the United States for the
lesser  period  of  three  years from  the  date  of  purchase  by  the
original  purchaser,  or  five  years  from  the  date  of  shipment  to  the
authorized  conrad-johnson  dealer.  During  the  warranty  period,
conrad-johnson  will  repair  defective  units  without  charge  for  labor
or parts (with the exception of vacuum tubes and batteries).

Exclusions. The following are not covered under this warranty:

a) Units which have been damaged by misuse, abuse, or
accident.
b) Units which have been modified, altered, or improperly
repaired by anyone not specifically authorized by conrad-
johnson design, inc.
c) Units not purchased from an authorized conrad-johnson
dealer in the United States for use in the United States.
d) Normal wear
e) Incidental or consequential damages are not covered under
this warranty. Some states do not allow the exclusion of
incidental or consequential damages, so this exclusion may not
apply to you.

Obtaining  Warranty  Service:  To  obtain  warranty  service,  the  unit
must  be  shipped,  along  with  evidence  of  purchase,  in  factory
packing  to  conrad-johnson  design  (or  designated  service  center)
with  freight  and  insurance  prepaid  by  the  owner.  After  repair,  the
unit will be returned with freight and insurance prepaid by conrad-
johnson design to any destination in the United States.

All  implied  warranties,  including  merchantability  and  fitness  for  a
particular  purpose  are  limited  in  duration  to  the  duration  of  this
express  warranty.  Some  states  do  not  allow  limitations  on  the
duration  of  implied  warranties  so  the  above  limitations  may  not
apply to you.

This  warranty  gives  you  specific  legal  rights  and  you  may  also
have other rights which vary from state to state.

Summary of Contents for LP260M












Reviews: