30
8. Inserting Slides
• Open the slide holder at the position
marked “OPEN” and fold the two halves
apart.
• Look through the slide into a light source
and turn it so that it is not mirror-in-
verted.
• Putt he slide on its head (turn it to the
left or right by 180°) and insert it into
the slide holder as shown on the right.
• Close the slide holder again.
• When inserting the slide holder in the film scanner, observe the white arrow on the holder.
This side must point upwards; push the slide holder into the film scanner (opening on the
right) until the first image locks.
Do not push the holder into the opening at the left and do not pull it out of the insert
on the right again either! The holder can only be pushed through the film scanner
in one direction, from the right to the left. Do not exert any force!
The holder must be moved manually; there is no transport mechanism in the film
scanner.
