31
9. Inserting Negative
• Open the negative holder at the posi-
tion marked “OPEN” and fold the two
halves apart.
• Look through the negative into a source
of light. The numbers on the negative
film should not be mirror-inverted.
• Put the negative on its head (turn it to
the left or right by 180°) and insert it
into the negative holder as shown on
the right.
• Close the negative holder again.
• When inserting the negative holder in the film scanner, observe the white arrow on the
holder.
This side must point upwards; push the negative holder into the film scanner (opening on the
right) until the first image locks.
Do not push the holder into the opening at the left and do not pull it out of the insert
on the right again either! The holder can only be pushed through the film scanner
in one direction, from the right to the left. Do not exert any force!
The holder must be moved manually; there is no transport mechanism in the film
scanner.
