13
8. Setting up the product
After switching on the product, the main menu is displayed on the television. You can customize
the product with the ‘Setup’ menu item.
Main functions of the IR remote control in the main menu:
Navigate through the individual menus with these keys.
Confi rm your inputs with this key.
You can return to the previous menu with this key.
You can change the following settings:
a) Audio
• Select ‘Setup’ → ‘Audio’. Here you have the
following setting options:
‘Night mode’
The Night mode (Dynamic Range Control)
changes the dynamics of the digital audio signal
to produce a uniform sound level. This boosts
the soft sections of the track and lowers the loud
sections.
‘Digital output’
The LPCM mode decodes the audio signal to
two output channels. Use this mode if you have a two-channel audio system (stereo).
The RAW mode sends the audio signal uncoded to the output source. Use this mode if you have
a multi-channel audio system.
☞
Use the ‘S / PDIF’ setting only when the product is connected to a multi-channel
audio system via an optical audio cable.