Airbrush-Compressor CE-70
Version 12/09
Item-No. 20 78 53
°
This product complies with all current National and European requirements.
Intended Use
The airbrush compressor CE-70 is intended for generating compressed air for air-
brush-applications for private use. Commercial use is not permitted.
The compressor is only approved for connection to 220-240V~/5050Hz alternating
current. Do not use any other power supply.
The product may only be used indoors; never outdoors. Do not expose to moisture,
under any circumstances.
Any other use, than that described above, could lead to damage to this product and
involves a risk for short circuits, fire, electric shock, etc.
No part of the product should be modified or reassembled.
Always observe the safety instructions.
Safety Instructions
The warranty will be void in the event of damage caused by failure to
observe these safety instructions! We do not assume liability for any
resulting damage.
We do not assume any liability for material and personal damage
caused by improper use or non-compliance with the safety instruc-
tions.
The warranty will be void in such cases.
An exclamation mark in a triangle indicates important instructions in
the operating instructions.
Please read all the instructions before using this device, they include
important information on its correct operation.
• For safety and approval (CE) reasons, unauthorised conversion and/or modifica-
tions to the product are not permitted.
• Prior to commissioning, check the compressor and the mains connection for dam-
age. If the device is damaged, do not put it into operation.
• The compressor is designed according to protection class I and may only be operat-
ed from a socket connected to the national grid.
• The never plug in or unplug the mains plug with wet hands. There is danger of a life-
threatening electric shock.
• The compressor is still connected to the mains when it is switched off. To disconnect
it completely from the mains, the mains plug has to be pulled out of the socket.
• If the power cable is damaged, do not touch it. First, switch off the appropriate mains
socket (e.g. via the respective circuit-breaker) and then carefully pull the mains plug
from the socket. Never use the product if the power cable or the product itself is
damaged.
• Check the compressor and the power cable from time to time for damage.
• Do not expose the product to strong mechanical stress. Do not expose it to high tem-
peratures, strong vibrations, drips or water spray.
• This product is not a toy, it is not suitable for children. Children are not aware of the
potential dangers when using electrical devices.
• Do not leave packaging material lying around carelessly. It may become a danger-
ous plaything for children.
• If in doubt about how to connect the device correctly, or should any questions arise
that are not answered in these operating instructions, please contact our technical
advisory service or another specialist.
• Also observe the safety instructions in the individual sections of this operating guide.
• When using tools to work with your compressor, please observe the safety instruc-
tions from the tool manufacturer(s).
O P E R A T I N G I N S T R U C T I O N S
www.conrad.com
Description of the Features
• Quiet operating sound
• Automatic shutdown (With sufficient pressure the compressor turns off and with too
low pressure it turns on again.)
• Adjustable pressure reducer with manometer
• Safety valve
• Water separator
• Spiral air hose
Components
(1) ON/OFF switch
(2) Air hose
(3) Air connection (pressure reducer)
(4) Water separator
(5) Condensation water valve (pressure reducer)
(6) Pressure regulator
(7) Connection
(8) Manometer
(9) Air connection (compressor)
2
