Placement
This unit is designed to be free standing and not built-in.
3
The unit should be placed in a ventilated and dry environment.
Do not put the unit in direct sunlight, and keep it as far as
possible from heat sources.
Don't put the unit in a cold area.
The unit should be placed on flat and stable ground. Keep the
unit level by adjusting the front leg levelers.
There should be enough space around the unit as shown, to
allow proper ventilation.
Operation
This appliance is intended for household use.
Temperatures in the refrigerator and freezer compartments are controlled by 2 separate
thermostat control knobs.
O
after 30 minutes.
and set the refrigerator and freezer compartments at the desired temperatures.
I
Before Use
Before initially plugging in the refrigerator, keep the unit standing upright and stable for
2 hours. The refrigerator should be on for up to 4 hours and adequately cold, before
putting food in it.
Both control knob settings are marked: Min, Med, and Max. Max is the coldest setting.
Medium is the default setting.
It is recommended that you clean the interior of the unit before placing food inside.
The glass shelves are adjustable and can be moved up or down as needed.
After plugging in the refrigerator, both sides on the unit will become warm.
This is normal.
4"
(
10cm
)
1
.2
"
(
3cm
)
2
"
(
5cm
)
