ConServ TMRI 180 S, Owner'S Manual

POSSIBLE CAUSE

PROBLEM

Doesn’t work

•  A fuse may be blown or the circuit breaker 

tripped

•  Plug not fully inserted into the wall outlet

•  Temperature setting is too warm

•  Door is not shut properly or opened frequently

•  Exhaust vent is obstructed

•  A large quantity of warm food has been placed 

in the unit

•  Close proximity to heat source or direct sunlight

•  Ambient temperature or humidity is very high

Appliance runs continuously

•  Temperature setting is too cold
•  Door not shut properly or opened frequently

•  Exhaust vent is obstructed

• 

•  Close proximity to heat source or direct sunlight

•  Ambient temperature or humidity is very high

Internal temperature is too cold

•  Temperature setting is too cold

Noises

•  Parts are expanding and / or the refrigerant is 

circulating; this is normal

• 

• 

• 

Doors cannot be closed properly

• 

• 

A large quantity of warm food has been placed 
in the unit

Troubleshooting

Power is not on or the unit is not connected to 
power
Low voltage

Floor is not flat, and the unit is not placed in a 
stable position.

The door is obstructed by items inside the unit.

The door gasket is not providing a good seal. 

Heat the gasket with a hair dryer.

 Internal temperature not cold

enough

Simply

The following phenomenon is normal

13