22
NOTE
: Do not use any other lubricate.
Place the intermediate module on to the rails and slide
slowly up to the end module. Keep straight when entering
the sleeves.
Do not carry using the openings or seals!
6�5 Container Assembly
After hardening of floor material, an end module is placed
on the rails and pushed to the end.
Insert the 5 sealing sleeves (pre-greased at the factory) into
the gaskets until they stop.
On the second module lubricate the 5 seals with the lubri-
cating grease (1) in the outer conical area. The grease is
enclosed with the shipment.
T D M A - VA R I C A L :
Assembly instructions