8
SOFTWARE UPDATES
Ref DS1 features an OTA (Over The Air) updater, meant to allow seamless and reliable way to
update to new system versions. It’s strongly suggested to check for updates periodically to ensure
that your system is always at the latest version.
How to check for Updates
Verify that your Ref DS1 is connected to the Internet.
Click on the cog-wheel in the top right part of the UI.
Select system.
Click on "Check Updates".
If an update is available, you'll be presented with the new features.
Click on "Update Now".
System update will start, and depending on the update size it might take up to 20 minutes.
Once Update has finished, you'll be asked to reboot. Do it.
The system will now restart, and the new version will be applied.
IMPORTANT: Do not remove power in this phase, as it might damage the unit.
SPECIFICATIONS
USB output:
4X USB 2.0, PCM 32 bits 768kHz, DSD512
CPU:
Quad core 1.8 GHz ARM Cortex-A17 with passive heatsink
RAM:
2GB
Internal Memory:
16GB Emmc
Video Output:
HDMI, up to 4K resolution
LAN:
Gigabit
Wireless Networking:
802.11 b/g/n Wi-Fi & Bluetooth 4.0 + EDR with External Antenna
Supported audio file formats:
DSD: DSF (DSD), DIFF (DSD)
PCM: FLAC, Apple Lossless (ALAC), WAV, AIFF, APE, MP3, AAC
Supported audio sample rates, bit depths, number of channels
：
PCM, 44.1khz-384kHz, 16-32bit, Stereo
DSD, 2.8MHz-22.4MHz, 1bit, Stereo
Digital inputs:
USB2.0
Digital output:
USB, I2S, Support Dop for Coaxial, AES, BNC
Dimensions:
352 ×290 ×80mm (W×D×H)
Weight: 5.9kg
* Specifications subject to change without notice.
