© Constructor 2020
7
When purchasing P90 directly with Constructor
or through a Constructor dealer, Constructor
maintains product reponsibility throughout
10 years. The product reponsibility includes
production errors as well as the product’s
good condition in security matters. This
implies that the values stated on the load
sign are valid for normal handling - on the
condition that other guidelines are followed.
Sale to third party
Please note that when selling to a third party,
Constructor’s product liability will cease (except
for production errors). The total installation
responsibility will pass on to the person having
sold the installation, and it is his/her duty to hand
over the installation documentation required
such as load data, installation manual and similar
documentation as described in this manual, to
the end user.
In case of a collapse or other non-desirable
incident for an installation sold as used by a
dealer or directly by the previous owner, the
product responsibility lies with the same person.
The position of the frame protector (distance
from the uprights) depends on the length of the
frame protector and a potential support.
The protector is anchored in concrete floor
with a concrete screw M10.
Single rack
Free clearance between upright and protector min.
25 mm. Applies to single rack with a frame depth
of max. 1300 mm.
Double rack
Free clearance between upright and protector
70 mm.
If any support for the protector is applied then
clearance can be reduced to 25 mm.
25 mm
70 mm
25 mm
Frame protector
Product safety and responsibility
