27
Demo Mode
on/off
If it is selected, the system will run in Demo
mode; otherwise, the system will run in sampling
mode.
7.9 Sampling setup
In the main interface, click
to enter the sampling setup interface, as shown below:
After clicking “Default”, the system will restore all settings to default.
The optional content of each setting item and its description are shown in the following
table:
Item
Options
Description
AC Filter
[ON]/[OFF]
Turn on or off the AC filter.
EMG Filter
[ON]/[OFF]
Turn on or off the EMG filter.
DFT Filter
[ON]/[OFF]
Turn on or off the Baseline filter.
Info Input
[Before]/[After]/[None]
Set to input the case information before or
after sampling, or not input
Show Style
[3 Leads]/[6 Leads]/[12
Leads]
Set the display method of ECG.
Show Gain
[5mm/mV]/[10mm/mV]/[20
mm/mV]
Set the gain of displayed ECG.
Show Speed
[12.5mm/s]/[25mm/s]/[50m
m/s]
Set the speed of displayed ECG.
7.10 Analysis parameters setup
In the main interface, click
to enter the analysis parameters setup interface, as
shown below:
The setup here will affect real-time analysis during sampling, case review and diagnosis
prompt of print report.
