.
20
to view the information about our company, software version.
7.2 Sampling interface
Click
on the main interface or press the
button to enter the sampling
interface.
Note: There is input time of cases in the system setting, therefore, case information should
be input before formal sampling. (refer to 7.3 for details)
The sampling interface provides several lead display modes, including 3-lead, 6-lead and
12-lead. The following figure uses 12-lead as an example:
End sampling:
After the device starts sampling, use the
button to end the
sampling, and back to the main interface.
Switch lead:
When the device does not simultaneously display 12 leads, use the
and
buttons to switch displayed waveform.
Switch lead display style:
use the
and
buttons to switch the display style
between 3-lead, 6-lead and 12-lead.
Lead-off information:
In demo mode, it displays “DEMO ECG”. In sampling mode, it
displays the detected lead status.
Print mode:
use the
button to switch the print mode between Manual, Auto 4×3,
Auto 3×4+1, Auto 3×4, Auto 2×6+1, Auto 2×6, Auto 3-2+1, Auto 3-2, Rhythm 4, Rhythm 3 and
