57
New and old batteries, different kinds batteries can not be put off.
Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic Sphygmomanometer.
Please don’t put wrong the positive and negative of battery. When the batteries power exhausts, replace with four
new batteries at the same time.
Please take out the batteries when you do not use the device for a long time (3 months or more).
Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic Sphygmomanometer.
If electrolyte of the batteries immodestly get in your eyes, immediately rinse with plenty of clean water.
It will cause blindness or other hazards, should immediately go to the nearest hospital for treatment.
If electrolyte of the batteries immodestly glues on the skin or the clothes, immediately rinse with plenty of clean
water.
Otherwise it may hurt the skin.
Advice
Do not strike or drop the device.
Do not inflate before the cuff wraps around the arm.
Do not inflect the cuff and the air tube forcibly.
Description of functions:
The Sphygmomanometer apply to measure the non-invasive blood pressure and SpO
2
of human (adult, children, neonate),
uses three-user mode, each user can store 100 items records of measurement results at most. Each record includes
detailed measuring time, systolic pressure, diastolic pressure, average pressure, pulse rate and record number, etc. With
2.8 inch color LCD screen, clear interface, the function of data review is complete. User can implement ON/OFF, manual
measuring, system setup, parameters change and other operations with seven buttons which are located on the front panel
of the device.
The Sphygmomanometer uses audible and visual prompt, when the battery power is low, the buzzer will intermittent buzz-
ing and LCD screen displays “Low Power” to prompt user replace batteries. When the measurement data exceeds the set
prompt limit, the font color of measurement results will change to red and the audible prompt will occur, user can open and
close the prompt sound according to needs. With timing shutdown function, if there is no operation and SpO
2
measure-
ment, the device will automatically turn off after 2 minutes. With USB interface, Users can send measurement results to PC.
Refer to the help or explication of the related software for specific operation.
ENGLISH
