Setup
AD12-64(PCI), AD12-16(PCI)
7
Setting up the Board
The board setup method depends on the operating system being
used. Set up the board using the method appropriate for the OS
that you are using.
Installing for Windows 98
Installing the board hardware
Before the board can be used under Windows 98, the OS must
recognize the I/O addresses and interrupt level (IRQ) to be used for
the board. Use the appropriate procedure to install the board.
(1) Set the board ID.
(2) Be sure to check that the personal computer is off; then plug
the board into a PCI bus slot in the system.
(3) Turn the personal computer ON to start up Windows 98.
(4) Windows 98 will come up with the [New Hardware] detection
dialog box. In the [Add New Hardware Wizard] that appears
next, check that "PCI Multimedia Device" has been listed, then
select [Next>].
(5) In the next dialog box, select a radio button of [Search for the
best driver for your device. (Recommended).], then select
[Next>].
(6) In the next dialog box, select both of the [Floppy disk drives
(F)] and [Specify Location (L)] check boxes, then enter the
drive name and the directory name, WIN95, into the
[Location] field.
(In the next dialog box, select two check box both of [Floppy
disk drives] and [Specify Location:], then enter the drive name
in the [Location] field.)
Insert the attached FD into the disk drive, then select [Next>].
(7) In the [Windows driver file search for the device] dialog box,
check that "CONTEC Co., Ltd. - AD12-x(PCI)" and
"AIO_PI0.INF" in the [Location of driver] has been listed,
then select [Next>].
Summary of Contents for AD12-16(PCI)
