Setup
FA-PAC(PCI)F13
13
3.
Setup
Setting up the BUS-PC(PCI)
Installing the BUS-PC(PCI)
Install the BUS-PC(PCI) board in the main unit of your PC.
(1)
Turn off the main unit and peripherals and disconnect the
power plug from the wall outlet.
(2)
Remove the cover from the main unit. For removing the
cover, refer to the manual coming with the PC.
(3)
Remove the screw of the slot cover for the PCI bus expansion
slot in which you want to plug the BUS-PC(PCI) board, then
remove the slot cover.
(4)
Insert the board into the PCI bus expansion slot. (See Figure
3.1.)
(5)
Pull the board slightly to make sure that it will not come off.
(6)
Use the screw removed in step (3) above to fasten the board.
(7)
Attach the cover back in place.
Figure 3.1. Installing the BUS-PC(PCI)
Notes!
- When installing the board, follow the relevant instructions in
the manual coming with your PC.
- Before installing the board, disconnect the power plug of the
PC from the wall outlet.
- Before installing the board, take off all precious metals from
your hands and wrists.