System Reference
FA-PAC(PCI)F13
26
Troubleshooting
If the FA-PAC(PCI)F13 does not work correctly, check the
following items:
If the power supply won't be turned on
- Check whether the power cable has been connected correctly.
- Check whether both of the PC and FA-PAC(PCI)F13 have been
on.
- Check whether you are following the procedures in Chapter 3.
- If the power supply will not yet be turned on, check whether the
power supply can be turned on with no board mounted on the
FA-PAC(PCI)F13. If the power supply can be turned on, check
if the total current consumption by the boards exceeds the power
capacity of the FA-PAC(PCI)F13.
- Check whether the cables connected to CN6 and CN7 on the
PC-MB14(PCI) are the specified ones.
If the PCI board in the FA-PAC(PCI)F13 won't be
recognized
- Check whether the BUS-PC(PCI) and BUS-PAC(PCI) have been
installed correctly.
- Check whether the expansion bus cable has been connected
correctly.
- Check whether the FA-PAC(PCI)F13 was turned on in prior to the
PC.
- Consult the manufacturer of your PC to check whether the PCI
BIOS in the PC supports the PCI-to-PCI bridge.
If the FA-PAC(PCI)F13 does not work normally even after
checking the above items, fill in the Question form included in the
package and send it to the CONTEC Information Center by
facsimile or
E-mail.
