Ver.1.00
CM-32L, CM-64L
１
Signal monitor Accessory for Digital I/O
CM-32L, CM-64L
Left : CM-32M, Right : CM-64M
Specifications, color and design of the products are subject to change
without notice.
Model
Number of I/O channels
Facilities for
additional functions
CM-32L 32 None
CM-64L 64
STB input
ACK output
This product is a Signal Monitor for a CONTEC Digital I/O
board/card. This product can monitor the status of the
connected signal line or generates pseudo signals onto the
signal line to debug programs and check their behavior.
- Signal monitoring LED provide for every point.
- Capable of generating switch-operated signals for all points.
- Capable of checking digital I/O board/card operation without
any external device connected.
- Capable of checking operation of an independent external
device.
- Capable of supplying external power from this product if
connected to an insulated digital I/O board/card.
- Mountable on a 35-mm DIN rail using the DIN rail mounting
adapter “DIN-ADP1” (separately priced).
Item CM-32L CM-64L
Number of I/O channels 32
64
Number signal
monitoring LEDs
32 64
Number of
pseudo-signal switches
32 64
External power
supply*1
12 - 24VDC
(depending on the board/card
connected)
12 - 24VDC
(depending on the board
connected)
Connector used
CN1, CN2:
37 pin D-SUB connector
[Female]
DCLC-J37SAF-20L9 [mfd. by
JAE, Female] equivalent
Screw lock #4-40UNC
CN3:
MC 1,5/ 3-G-3,5
[mfd. by PHOENIX
CONTACT] equivalent
CN1, CN2:
PCR-E96LMD [mfd. by
HONDA]
CN3:
MC 1,5/ 3-G-3,5
[mfd. by PHOENIX
CONTACT] equivalent
Operating Conditions 0 - 50ºC, 20 - 90%RH (No condensation)
Physical Dimensions (mm) 105(W) x 230(D) x 35(H)
Weight 200g
260g
Facilities for additional
functions
None
STB input, ACK output
*1: When the product is connected with a digital I/O board/card with an integrated power
supply, no external power supply is required if the product uses that internal power supply.
No external power supply is required when the product is connected with a non-isolated
digital I/O board/card.
DIN rail Mounting Adapter for Accessories
: DIN-ADP1
AC adaptor
(Input: 100VAC, Output: 12VDC 1A)
:POA201-10-2
Accessories
Specifications
Features
