2. Setup
18
ECH-PCI-CE-H2B, ECH-PCI-CE-F2B, ECH-PCI-CE-H4B, ECH-PCI-CE-F4B
Setup Troubleshooting
Please confirm followings when the ECH-PCI-CE-H2B does not work.
Symptoms and Actions
The chassis won’t be turned on.
a. Make sure that the power cable has been connected correctly.
b. Make sure that the AC adapter has been connected correctly.
c. Make sure that the power supplies of the PC or this product are on.
d. Make sure that you have followed the procedure in Chapter 2.
e. Even though the chassis is still not turned on, check whether it is turned on with no board installed.
If the chassis is turned on with no board installed, check the total current consumption by the
installed boards. The total current consumption must not exceed the power capacity of this
product.
No PCI board on this product is detected.
f.
Make sure that the expansion adapter has been installed correctly.
g. Make sure that the connection cable has been installed correctly. When connecting the connection
cable to the main chassis, insert the connector until it clicks into place.
h. Make sure that the POWER LED on this product is turned on.
The photo is of the EAD-CE-EC +
ECH-PCI-CE-H2B.
g
f
a
b