3. Installing the Motherboard
FA-UNIT-F11BE, FA-UNIT-F11ME
13
3.
Installing the Motherboard
Installing the backplane/motherboard
There are various types of backplanes and motherboards and their installation hole positions are all
different. However, basically any of them can be installed by following the same procedures.
Preparation
(1) Turn the power switch off.
(2) Pull the power plug of the unit from the wall outlet.
To install the backplane/motherboard
(1) Remove the screws fastening the top cover,
then remove the cover.
When loosening the screws, use the
appropriate type of screwdriver that fits the
screw head.
(2) First remove the fall-off prevention bar from
the expansion board.
Next, fix the attached hexagon spacers or
plastic spacers to the holes in the main unit
and place the backplane/motherboard on it
and fix it with screws.
In this case, select the positions of fixing
holes so that the backplane or motherboard
can be fixed in a balanced manner.
(3) Return the fall-off prevention bar and cover to
their original positions and fix them with
screws.