3. Installing the Motherboard
FA-UNIT-F11BE, FA-UNIT-F11ME
15
(3) Install the expansion board and fix it with screws.
(4) Return the fall-off prevention bar and cover to their original positions and fix them with screws.
Unplugging an Expansion Board
To unplug an expansion board, follow the steps below in the reverse order of plugging it.
(1) Before starting removing the expansion board, pull the power plug of the unit from the wall outlet.
(2) Following the same procedures as for insertion, remove the bracket fixing screws of the slot from
which you want to remove the board.
(3) Remove the board by pulling it at a right angle to the expansion slot.
(4) Use the screw to fasten the bracket removed when plugging the board.
(5) Replace and screw the cover.