background image

1. Before Using the Product 

  

 

 

 

4

 GCOM-2C2-PCI, 

GCOM-4C2-PCI, GCOM-8C2-PCI 

Customer Support 

CONTEC provides the following support services for you to use CONTEC products more efficiently and 
comfortably. 

Web Site 

Japanese http://www.contec.co.jp/ 
English http://www.contec.com/ 
Chinese http://www.contec.com.cn/ 

Latest product information 

CONTEC provides up-to-date information on products. 

CONTEC also provides product manuals and various technical documents in the PDF. 

Free download 

You can download updated driver software and differential files as well as sample programs available in 
several languages. 

 

Note!  For product information 
Contact your retailer if you have any technical question about a CONTEC product or need its price, 
delivery time, or estimate information. 

Limited Three-Years Warranty 

CONTEC Interface boards are warranted by CONTEC Co., LTD. to be free from defects in material and 
workmanship for up to three years from the date of purchase by the original purchaser. 

Repair will be free of charge only when this device is returned freight prepaid with a copy of the original 
invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office, from 
which it was purchased. 

This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and 
original boards.  The warranty is not applicable if the device has been tampered with or damaged through 
abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in which case 
repairs will be considered beyond the warranty policy.   

How to Obtain Service 

For replacement or repair, return the device freight prepaid, with a copy of the original invoice.  Please 
obtain a Return Merchandise Authorization Number (RMA) from the CONTEC group office where you 
purchased before returning any product.   

*  No product will be accepted by CONTEC group without the RMA number.   

Liability 

The obligation of the warrantor is solely to repair or replace the product.  In no event will the warrantor 
be liable for any incidental or consequential damages due to such defect or consequences that arise from 
inexperienced usage, misuse, or malfunction of this device.   

Summary of Contents for GCOM-2C2-PCI






















































Reviews: