1
PCB68PS-0.5P, PCB68PS-1.5P, PCB68PS-3P, PCB68P-5P
Shielded Cable With Two 68pin Connector
PCB68PS-0.5P, PCB68PS-1.5P,
PCB68PS-3P, PCB68PS-5P
User’s Guide
CONTEC CO.,LTD.
This products are cables for connecting a 68-pin 0.8mm-pitch connector on CONTEC board with 68-pin
0.8mm-pitch connector.
External Dimensions
Specifications
Item
Specification
Connector used
68-pin 0.8mm-pitch connector HDRA-E68MA1 [HONDA] or equivalent x 2
Thumb screw: M2
Cable
68 core shield cable (34pair). Conductor size: AWG#30
Conductor composition: 7pcs/0.1mm UL20276
Weight
160g(PCB68PS-0.5P), 280g(PCB68PS-1.5P), 460g(PCB68PS-3P), 700g(PCB68PS-5P)
Notes!
-
Do not strike or bend the product. Otherwise, the product may malfunction, overheat, cause a
failure or breakage.
-
Do not insert or remove the connector while the power is turned on to the PC. Failure to observe
this precaution may cause malfunction, overheating.
-
The specifications of this product are subject to change without notice for quality improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
-
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for any results of using the product.
-
All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
1
35
68
34
34
1
68
35
9mm
42.
7mm
15mm
8mm
33.69mm
PCB68PS-0.5P
500mm
PCB68PS-1.5P
1,500mm
PCB68PS-3P
3,000mm
PCB68PS-5P
5,000mm
15mm
33.69mm
9mm
42.
7mm
