2. System Reference
8
PT-310 User’s manual
Table 2.2. Installation Environment Requirements
Model
PT-310LS-AC35311x
Operating temperature *4
0 - 50 ºC
Storage temperature
-10 - 60 ºC
Operating humidity
10 - 90%RH(No condensation)
Floating dust particles
Not to be excessive
Corrosive gas
None
Noise
resistance
Line noise
AC line / ±2kV *5
Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
electricity
resistance
Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level2),
Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level3)
Vibration
resistance
Sweep
resistance
10 - 57Hz/0.075 mm (semi-amplitude (0-p))
One cycle (10-150-10 Hz) of 1 oct/min test at 9.8 m/s
2
(1G) between 57 and 150 Hz 5
times in three (X/Y/Z) directions (40 minutes each)
(JIS C60028-2-6-compliant, IEC60068-2-6-compliant)
Impact resistance
10G, half-sine shock for 11 ms in x, y, and z directions
(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Water-proof and dust-proof IP65, front
Grounding
Class D grounding, SG-FG / continuity
Standard
VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)
*4: For more details on this, please refer to chapter 3, “Installation Requirements”.
*5: When using the IPC-ACCODE3 AC power cable.
Display Optical Specifications
Table 2.3. Display Optical Specifications
Parameter
Condition
Min.
Typ.
Visual angle
(vertical)
CR
≥
10
ϕ
= 180°
Display.
Monochro
me
55deg
65deg
ϕ
= 0°
65deg
75deg
Visual angle
(horizontal)
ϕ
= +90°
70deg
80deg
ϕ
= -90°
70deg
80deg
Surface
brightness
(at center)
Display in white
300cd/m
2
450cd/m
2
*
“Surface brightness” represents a numerical value per display. The expected brightness through a touch panel is
about 80% lower than the above value.
Contrast ratio (CR) = Brightness at screen center with white displayed
Brightness at screen center with black displayed
