—
Safety Precautions
—
SH-9008AT-POE Reference Manual
- 11 -
2.
Handling Precautions
WARNING
Always check that the power is turned off before connecting or disconnecting power cables.
Do not modify the product.
Do not use the product in locations exposed to a flammable or corrosive gas. It may cause
explosion, fire, electrical shock, or malfunction.
Do not allow this device to come into contact with foreign substances (metal particles,
flammable substances, liquids, etc.) This can cause fire or electrical shock.
Do not place this device in an unstable location or use incomplete mountings. This may cause
the device to fall.
Be sure to connect the product to the stipulated power supply voltage. Connecting to a
different voltage might cause a fire or electrical shock.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
This product is not intended for use in aerospace, space, nuclear power, medical equipment,
or other applications that require a very high level of reliability. Do not use the product in
such applications.
If using this product in applications where safety is critical such as in railways, automotive, or
disaster prevention or security systems, please contact your retailer.
CAUTION
Do not use or store the product in a location exposed to extremely high or low temperature
or susceptible to a rapid temperature changes.
Example:
- Exposure to direct sun
- In the vicinity of a heat source
Do not use the product in extremely humid or dusty locations. It is extremely dangerous to
use this product with its interior penetrated by water or any other fluid or conductive dust. If
this product must be used in such an environment, install it on a dust-proof control panel, for
example.
Avoid using or storing the product in locations subject to shock or vibration that exceeds
range of specification.
When transporting the product, take suitable measures to avoid applying shock or vibration
directly to the product.
Impact resistance: 15G (11ms) below.
Use the product in the specified operating condition (temperature, humidity, vibration and
shock).
The product should always be grounded (earth).
