5. BIOS Setup
VPC-500 Series User’s Manual
43
◆
Power Control Configuration
Configure the Power control settings.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Configuration
Power Control Configuration
Enable Hibernation
[Enabled]
ACPI Sleep State
[S3 (Suspend to RAM)]
Restore AC Power Loss
[Power Off]
Wake On Ring Controller
[Disabled]
Wake system with Fixed Time
[Disabled]
→←
:Select Screen
↑↓
:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Figure 5.13 Power Control Configuration
Table 5.12 Power Control Configuration
Item
Option
Description
Enable Hibernation
Disabled
Enabled
Configure the hibernation settings.
ACPI Sleep State
Suspend Disabled
S3 (Suspend to RAM)
Configure the sleep state settings.
Restore AC Power Loss
Power Off
Power On
Set whether to start the system at the same time the
power supply starts.
Power OFF :
Press the power button to start the system. The system
does not start at the same time the power supply starts.
Power ON :
The system will start at the same time the power supply
starts.
Wake On Ring
Controller
Enabled
Disabled
Configure the resume on ring function settings.
Wake system with Fixed
Time
Disabled
Enabled
Enable or disable the function for automatically turning
on the system at the specified date and time. When
enabled, use the following items to set the date and time
the system will automatically turn on.
