Using the scanner, how do I …?
4-2
4. Use arrows down/up to select the load method –
Auto Load
or
Manual Load
. Confirm with
OK
.
5. With
Auto Load
you can select a delay factor if the document is grabbed too fast. Press
arrow right to reach
Load Delay
and arrow down/up to set a delay factor between 0-1000.
1.
nter with the scanner’s center arrow guide marker.
2. Push the original into the insertion slot until you feel it contact the rollers.
gh
(yellow for thick media) when the original is positioned
4.
e original in place with one hand, use the other hand to press and hold
lot.
1. Align the original’s center with the scanner’s center arrow guide marker.
slot until you feel it contact the rollers.
original is positioned
n position.
4.2
ick Media
m
How do I load the scanner with …
manual loading
- you determine when the scanner pulls in the original:
Align the original’s ce
3. The Paper Ready LED li
ts green
correctly for a straight scan path.
While holding th
down the Paper Forward button on the scanner.
5. The original moves into the start-scan position.
automatic loading -
the scanner takes the original as soon as you insert it in the paper s
Automatic loading is reliable for most jobs and especially useful for batch scanning jobs.
2. Push the original into the insertion
3. The Paper Ready LED lights green (yellow for thick media) when the
correctly for a straight scan path.
4. The scanner will grab the original automatically and move it into start-sca
Loading and Scanning Th
You may need to digitize or copy images printed or pasted on thick media such as cardboard,
boards, gatorboards etc.
foa
On Scanners
:
Your flatbed scanner can accommodate originals up to 1,5” ( 38 mm,) thick while still allow
ou to close the cover. For very thick originals you can leave the cover open.
ing
On Scanners
:
y
These scanners support Automatic Thickness Adjustment Control (ATAC). There is an ATAC
key on the iJET Panel. You use the key to raise and lower the pressure-platen. You can change
re-platen height) on your scanner from 2mm to 15 mm (up to 0.6”).
mm thick sh uld be scanned with the pressure platen all the way down (normal
the insertion slot size (pressu
riginals up to 2
o
O
position). Thicker originals will require you use the ATAC key to adjust for thick media.