Using the scanner, how do I …?
5-8
5.2.4 How do I… Set number of Copies?
ou can tell the system to make multiple copies of the original in the scanner. You can set the
output between 1 and 50 copies. The default value is 1.
o set the copy
Copies
value:
Y
s
ystem to
T
On the iJET Panel –
.
Quick
Button Setting
- Press the
Copies
button
The iJET Panel display will open
the
Copies
option with the “>” marker on the value level indicating you can immediately
change the
Copies
option’s value. From here you can skip steps 2 and 3 and go to step 4 to
change the value.
.
Through the Menu
– Press the
button to enter the main Menu.
Use the arrow up/down buttons
1
2
to move through the Menu options until the display
shows
Copies.
3. Press
Enter
to move the “>” marker down to indicate you want to change the
Copies
value.
4.
change the value:
5.
Repeated presses to the Copies button
Copies
value forward in single
6.
There are two ways to
will change the
steps from 1 to 50..
Or…press the arrow up/down buttons
to change the
Copies
can increase and decrease the value.
value. With these you
7.
Press
the
Enter
button to accept the selected value. The “>” marker will move up to the
Menu level indicating that the value is set and you can step on through the menu options if
needed. The ne
The ”>” marker is on the Menu level. You can continue
w
Copies
value will be applied every time you press the B&W Copy or Color
Copy button until you repeat the steps above to change it.
navigating the menu options with the arrow up/down
buttons.
>
Copies
3
Copies
>
1
Copies
Copies
>2
Copies
Copies
>
3
…..
Menu
Copies
The “>” marker is down to the value level so you can
change the value.
Copies
>
1
>
Copies
1
Copies
>
1