5-2
Installation
5.1 Installation of the SCSI board in the PC.
1. Set the PC-system unit power switch to OFF.
2. Set any external option power switches to OFF (such as printers,
displays etc.).
3. Unplug the PC-system unit and all other options from the wall outlet.
4. Remove the cover of your computer to expose the expansion slots.
5. Align and insert the SCSI host adapter board into an empty slot, and
use the expansion slot panel screw to secure the host adapter to the
computer frame.
6. Connect the SCSI cable from the FSS Scanner to the connector on
the SCSI board back panel.
7. Set the scanner DIL Switch as described overleaf in the section:
"Scanner SCSI address setup ".
For further installation description and installation of SCSI driver*
please see the documentation that came with your interface kit.
*Note:
SCSI driver installation will be dependent on your Windows
operating system.
5.2 Installation Verification
Install the WIDEimage program as described in the WIDEimage User
Guide that came with the software package.
Run the Height Adjustment of the CCD Cameras as described in this
guide’s Chapter 6 on "Maintenance" to verify the above installation.
Summary of Contents for FSS12300
Page 1: ......