Turning the Scanner ON/OFF
23
Sleep/Wake mode options
– automatic power
management
Automatic power management lets you schedule your scanner‟s up-time
optimally and helps save energy.
You can set the scanner for automatic power OFF (Sleep) and power ON
(Wake-up). Automatic power management functionality is set and
controlled through your WIDEsystem software.
There are two automatic power functions:
1. Timer function
2. Enter Sleep mode automatically (after idle time) option.
In order to use automatic power management functionality: the
scanner Main Power switch at the scanner’s back must be turned ON.
The power LED on the operator‟s panel will light orange when the scanner
is in Sleep Mode (powered OFF) and green when in Wake Mode (powered
ON).
Scanner in Wake mode
–
Power LED is green
Scanner in Sleep mode
–
Power LED is orange
Timer Function
– Scheduling ON/OFF Times
You can program your whole weekly schedule into the scanner so it powers
ON and OFF (wake
– sleep) on its own. You enter your schedule‟s wake-
up and sleep times in WIDEsystem‟s
Timer
tab as shown in the example
below. .
