Maintenance
57
Replacing the scanner lamp
Remove the lamp cover
1. Place your finger in the gap
at the cover‟s right side and pull
gently back to free the lid
‟s catch.
2. Pull the cover sideways and off its hinge to completely detach
it from the scanner.
3. The edge of the lamp unit will be exposed and accessible.
Replacing the scanner lamp
Remove the old lamp-unit
A lamp-unit consists of a fluorescent lamp that is mounted in
a metallic reflector brace with fixed power connectors at the
inner end.
You must remove and replace the whole lamp-
unit
.
1. Locate the handle at the top edge of the lamp unit.
2. Place your fingers under the handle.
3. Carefully pull the lamp unit out of the scanner.
Lamp unit handle
4
3
