Maintenance
41
Clean the new glass plate
Make sure you use 2 fresh and clean lint-free cloths for cleaning your new glass
plate.
1. Spray/apply a mild, streak-free, glass cleaner onto a lint-free cloth.
2. Gently wipe the glass clean. Look for fingerprints and smudges that may have
been applied to the glass during replacement.
3. Dry the glass completely using the other clean, dry lint-free cloth.
4. Make sure that fluids to not get under the glass and that you leave the area dry.
CAUTION
: Do not spray/apply cleaner fluids directly on the glass plate or
anywhere else in the scan area.
Glass plate replaced successfully
1. Close the scanner lid all the way down until you here the lid latches “click”.
Gently try to pull open the lid to ensure it is locked in the “closed” position.
2. Plug in the scanner and turn the main power switch to ON.
3.
NOTE:
If your results are not optimal after changing the glass plate, try to
calibrate the scanner
to tune it to its new glass plate.
13
12
