20
CLEANING BEER TAP MECHANISAM
Beer cooler need conformity with hygienically demand, it need clean
before the first use or for long time use, clean the whole machine
with dry cloth. Otherwise two cleaning way is recommended as
following:
1. Load the warm water into the cleaning bottle.
2. Connect the cleaning pump to the end of piercing pin, press the
bottle to let the water go into the pin to clean the pin tube, at the
same time push the tap to let the water flow out. And repeat this
cleaning action till the beer tube is clean (need 3 bottles warm
water at least) (see Figure 29).
3. If only need to clean the beer tap mechanism, just connect the
cleaning bottle to the beer tube and follow above step (see
Figure 30).
Warning:
Never put the tap mechanism parts in the washing machine or
dishwasher;
Never use the chemical cleaning detergent to clean the parts, warm
or purified water is recommended.
Figure 29
Figure 30
Cleaning bottle
Beer connector must connect
to the dispensing unit
Please
open
the
tap
when you are
the
cleaning
tube
Dispensing unit
This connector end must connect
to the cleaning bottle
