25
MAINTENANCE
If the beer cooler does not work properly, please call the service
center;
To save time and money, before you call for service, check the
Troubleshooting Guide. It lists cause of minor operation problems
that you can correct yourself.
Trouble
Cause
Troubleshooting
The tap does
not
work
/
can’t
pour
beer out
1. The pouring tube is in poor
connection or CO2 supplying is
cut off.
2. No keg or no beer in the keg.
3. No gas in the CO2 cartridge.
4. The CO2 pressure regulator
knob is close.
1. Well connect the pouring
tube and CO2 supplying.
2. Change a new keg.
3. Change a new CO2
cartridge.
4. Turn the CO2 pressure
regulator knob on “+” position.
Too much
bubble
pouring out
1. Use a wrong way to pour beer
out.
2. The beer temp is high (better
at 3-5
o
C).
3. The keg is shaken before
usage.
4. Almost no beer in the keg.
5. Too much pressure in the
keg.
1. Use the right way to pour beer
out.
2. Cool the beer down to 3-5
o
C.
3. Put the beer keg aside a while
till no bubble inside.
4. Change a new keg.
5.
Adjust the pressure knob to“-
“ direction to decrease the
pressure or close the knob.
Beer flows out
too slowly
1. The CO2 pressure inside the
keg is not high enough.
2. The connection tube or
pouring tube has leakage.
1. Adjust the pressure knob to
release much CO2 pressure or
replace a new one.
2. Check whether the tube is
leakage or not, if so please
replace the tube.
