46
3 .Using the extractor hood as an exhaust air hood (with air
extracted to outdoors)
If the extractor hood has been fitted at the factory with a
carbon filter, this must be removed for exhaust air operation.
It is only practicable to use this when operating your hood in
circulation mode.
4.Converting the extractor hood to a circulation hood
If you wish to use the hood as a circulati-on hood, you must
mount the activated carbon filter(s) to the fan motor before
using the hood. If not included in the scope of supply, you
must obtain the carbon filter(s) from the supplier of your
extractor hood.
5. Mounting the carbon filter
Place the carbon filter
into the unit and turn it
clockwise. Repeat the same on
the other side.
NOTE:
Make sure the filter is securely locked. Otherwise, it can fall
and cause danger.
When charcoal filters are used, the suction power is
decreased.
The carbon filter must be replaced at least once a year
depending on how frequent the cooker hood used.