C. Installing the feet
Your TV comes with unassembled feet. Before using this free standing TV on furniture,
install the feet as shown below.
Step 1
Place the TV flat, screen facing down, on a
flat surface covered with a soft, thick cloth to
avoid damaging it.
The lower edge of the TV should protrude
slightly from the edge of the flat surface to
allow the feet to be attached without
damaging the LED screen.
Step 2
Align the bottom of the TV with the feet until
they are fully in place (mounting holes
aligned).
Step 3
Tighten the supplied screws using a
screwdriver.
NOTE:
unplug the TV from the mains outlet when installing or removing the feet of the TV.
Contact one of our partners to learn more about how to install and remove the feet of the TV.