31
•
Press the
RED
key to delete a program.
Signal information
Press ▲/▼ to select
Signal Information,
then press the
OK
button to display signal information.
CI Information (Common interface)
Press ▲/▼ to select
CI Information
, then press the
OK
key or ► to display the submenu.
2. Picture menu
Press the
MENU
key to display the main menu.
Press ◄/► to select
PICTURE
from the main menu and press ▼ to access the settings.
1-
Press ▲/▼ to select the option to set in the
PICTURE
menu.
2-
Press ▲/▼/◄/► to adjust the desired setting.
3- Press the
MENU
key to return to the previous menu.
4- Once the settings have been made, press the
EXIT
key to exit the settings page.
Picture mode
Press ▲/▼ to select
Image mode
, then press the
OK
key to display the submenu.
Press ▲/▼ to
adjust. The available picture modes are: Dynamic, Standard, Soft and Custom.
NOTE:
press the
PMODE
key on the remote control to switch between the different picture modes.
Contrast
Press ▲/▼ to select
Contrast
, then press ◄/► to set the opt
ion.
Brightness
Press ▲/▼ to select
Brightness
, then press ◄/► to set the option.
Colour
Press ▲/▼ to select
Colour
, then press ◄/► to set the option.