45
•
The LED display and the indicator lights switch on to indicate that the
appliance is on.
•
Press the « Menu » key, select the « Vapeur » cooking program using the
« - » or « + » selection keys. The selection is confirmed when the steam
program indicator light flashes red; press the « Démarrer » button.
•
Leave the appliance operating for a complete cooking cycle of the
« Vapeur » program.
•
Air the room during this operation.
NOTE: It is normal that strange odor comes out from the unit for the first use.
This will cease after a short while. Do not forget to air the room during this
operation.
Attention!
➢
Leave a sufficient space of 20cm around the appliance, and a distance of
30cm above the multicooker. Do not place your appliance and its power cord
on or near a heat source and the like such as a hotplate, oven, heater, etc. The
appliance must not be placed inside a piece of furniture while it is in use.
➢
Do not exceed the maximum filling level indicated on the internal wall of the
tank by the markings « 1.8L / 10 CUP ».
➢
Never operate the appliance without the bowl in place or with an empty bowl.
Never put water or ingredients in the appliance without the bowl inside. This
can damage and shorten the life of the appliance.
➢
Pour le transport sécurisé de l’appareil, utiliser la poignée de l’appareil.
➢
Risk of burns! Do not place your hand or any part of your body above or near
the steam vent. During cooking, a very large amount of steam can
accumulate in the appliance. Do not lean over the appliance cover when
opening it. The bowl and any accessories used may be hot. Be sure to use an
oven mitt when handling the bowl or accessories.
➢
Ne déplacez pas l’appareil lors de son fonctionnement.
Do not move the
appliance during use.
➢
Never use steel objects, knives or forks on the inner surface of the bowl, as
this may scratch and damage the non-stick coating.
➢
Do not use your appliance for deep frying.
➢
Unplug your appliance if you will not use it at the end of cooking.
Summary of Contents for CEMC900IN
Page 97: ...97 CEMC900IN_IM_012020_V1 ...