EN-11
a. UNPACKING
THE
EQUIPMENT
AND
DISPOSAL
OF
PACKAGING ELEMENTS
i. Remove all the packaging elements around the unit, as
well as the protection elements located within the
compartments of the unit.
ii. The carton and the paper is recycled. They must be thrown
into the collection bins provided for this purpose.
•
The materials marked with the symbol
are recyclable:
> PE <= polyethylene; > PP <= polypropylene
This means they can be recycled by depositors in appropriate
collection containers.
•
The other packaging elements (adhesive fasteners etc.) must be
disposed of with household waste.
b. PREPARING TO SLICE
1. Unwrap cord from bottom of slicer, and slide into slot. Position
slicer on a clean, dry and smooth surface.
2. Move the sliding feed table back and forth a few time to make
sure movement.
3. Place the piece holder on back of the sliding feed table.
4. Select the required slice thickness by turning thickness adjusting
knob, clockwise for thinner slice and counter-clockwise for thicker
slice. The range of thickness adjusting is from 0 to 15mm.
III
–
BEFORE FIRST USE