EN-14
UNPLUG THE SLICER FROM THE OUTLET
All slicing parts remove for thorough cleaning. Wash with a soft cloth or
sponge and a mild soap or a spray cleaner. Rinse and dry.
LOOK OUT! DANGER OF CUTTING.
WARNING!
•
Never use steel wool or scouring powder on any part of slicer. Do not
wash any part of slicer in dishwasher.
•
Motor is concealed in housing. Never submerge water.
•
Motor never needs oiling.
1. PIECE HOLDER:
Remove the piece holder from the sliding feed table.
2. SLIDING FEED TABLE:
Clean the sliding feed table after removing the piece holder.
3. STAINLESS BLADE:
Unplug the item, loose the left-screw as the arrow direction. Then take
off the blade carefully with hand glove. After cleaning, tighten the blade
with the left-screw on the contrary direction.
Note:
Always align thickness guide with blade for safety and blade
protection during storage.
4. NON-SLIP FEET:
Clean with any grease-removing cleanser, such as alcohol or window
cleaner.
VI
– CLEANING THE DEVICE