29
TEMPERATURE SETTING
①
power button
②
illumination lamp button
③
display screen
④
temperature “+” button
⑤
temperature“-”
Quick start
1.
Child lock button (combined button)
Lock: The button will be locked automatically after power-on or 30s if no
button is operated, or the button will be locked when the button is
pressed for long.
Unlock: To unlock the button, press both buttons at the same time for
3s followed an alert tone. Any operation should be in unlock mode.
2.
Celsius degree/ Fahrenheit degree switchover button (combined
button)
Press both buttons at the same time, and then you can switch over
between the Celsius degree and Fahrenheit degree for display. Each
time the button is pressed, a switchover will be made. When setting
the system temperature, it is not allowed to switch over between the
Celsius degree and Fahrenheit degree.
3.
Power on/off button:
1. Press this button for 5S, and then all external power sources will be
disconnected, and all external equipment will be turned off, with the cooler in
ready mode, the display screen will indicate “οϜ” for 60s.
2. When the cooler is in the ready mode, press this power button for 5S, the
cooler will restore its normal operation and work under real-time conditions.
4.
Lamp control button
Press the lamp control button, the LED lamp is lighted. When the LED lamp is
on, the color can be adjusted according the cycle of “white”→”yellow”→”blue”→
“white” three colors each time this button is pressed. The LED lamp is on for 10
minutes if no operation. You can turn off the lamp by pressing this button for 3s.
The lamp will turn off if there is no operation for 10mins.
5.
Temperature “+” button
1. Functions of temperature “+” button:
In locked mode, the action of any
button is detected, the display screen will indicate the current set temperature.
After unlock operation, this button can be operated to increase the set
temperature by 1
℃
each time the button is pressed. The display screen will
indicate the current set temperature in a flashing way and at a certain interval,
and 5s later, if no further action of this button is detected, the setting after
adjustment will be memorized, and the screen will exit from the flashing mode
and restore the indication of the set temperature.
