1.0 INSTALLATION OVERVIEW
NOTE: Changes, other than editorial, are denoted by a vertical line in the margin.
8.8 DRAFT
CONTROL
76
8.9
FUEL LOADING AND BURN CYCLE
77
8.10 RE-LOADING
THE
APPLIANCE
78
8.11 FLASH
FIRES
78
8.12
SMOKING
78
8.13
ASH REMOVAL PROCEDURES
79
8.14
INSPECTION OF HEAT EXCHANGERS, FLUES AND CHIMNEYS
79
9.0 MAINTENANCE
80
9.1
RUN-AWAY OR CHIMNEY FIRE
80
9.2
FIRE EXTINGUISHERS AND SMOKE DETECTORS
80
9.3
GLASS AND GASKET REPLACEMENT
80
9.4 FIREBRICKS
AND
BAFFLES
81
9.5 SELECTING
WOOD
81
9.6 GLASS
REPLACEMENT
82
9.7
INSULATION INSERT REPLACEMENT
83
9.8
CREOSOTE FORMATION AND REMOVAL
83
9.8.1
MAINTENANCE OF THE EXCHANGERS
84
9.8.2 CHIMNEY
MAINTENANCE
84
9.9 FILTERS
85
9.10
BLOWER MOTOR LUBRICATION
85
9.11
DOOR GASKET MAINTENANCE
85
9.12
CARE OF GLASS (IF EQUIPPED)
85
10.0 REPLACEMENTS
86
11.0
TROUBLE SHOOTING GUIDE
87
12.0 WARRANTY
88
13.0 SERVICE
HISTORY
89
!
WARNING
H68.1
THIS APPLIANCE AND ITS COMPONENTS ARE DESIGNED TO BE INSTALLED AND OPERATED
AS A SYSTEM. ANY ALTERATION TO OR SUBSTITUTION FOR ITEMS IN THIS SYSTEM, UNLESS
ALLOWED BY THESE INSTALLATION INSTRUCTIONS, WILL VOID THE OMNI LISTING AND MAY VOID
THE WARRANTY. IT MAY ALSO CREATE A HAZARDOUS INSTALLATION. READ THROUGH THESE
INSTRUCTIONS THOROUGHLY BEFORE STARTING YOUR INSTALLATION AND FOLLOW THEM
CAREFULLY THROUGHOUT YOUR PROJECT.
HEAT EXCHANGER
(Section 9.8.1)
BLOWER MODULE
(Section 5.2)
BYPASS DAMPER
(Section 8.5)
ELECTRIC FURNACE
MODULE (Section 5.4)
DOOR COMPONENT REPLACEMENT
(Section 9.6, 9.7)
OIL FURNACE MODULE
(Section 5.3)
EMBER STOP
(Section 6.6)
SOLID FUEL FIREBOX
(Section 4.7)
PRIMARY AIR CONTROL
(Section 4.6)
OUTSIDE COMBUSTION
AIR (Section 3.2)
CHIMNEY INSTALLATION
(Section 6.0)
INSTALLATION OVERVIEW
RATING PLATE INFORMATION
(Section 2.4)
W415-1506 / A / 12.04.15
3
EN