ROLL-IN & ROLL-THRU
FREEZERS
FREEZERS
Utilizing Environmentally Safe, CFC-free R-404A Refrigerant
Standard Features
•Modern, State-Of-The-Art Styling
•Performance Rated, "Plug" Refrigeration System
Utilizing Environmentally Safe R-404A
Refrigerant
•3" High Density, Non-CFC Polyurethane Foam
Insulation
•Chrome-Plated Flow Line Handles
•Cam-Action Lift-Off Hinges
•Cylinder Lock in Each Door
•Automatic Hot Gas Condensate Evaporator
•27
3
/
8
" Wide, 66
1
/
2
" High Door Openings
•External Digital Thermometer
•Automatic Electric Defrost
•Removable Stainless Steel Rack Guides
•Magnetic Snap-In Door Gaskets
•Unique Air Flow Distribution Ducts Keep Pan
•Product at Uniformly Constant
Temperatures
Optional Features & Accessories
•Roll-Thru
•Glass Door
•Remote
•Consult Factory
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
DL1FI-SS
DL2FI-SS
REFRIGERATION SYSTEM
A "performance rated", air-cooled hermetically sealed,
capillary type refrigeration system is installed on the top
of each freezer. Plasticized fin coil and air circulating
fans are contained within a concealed "plug" type insu-
lated housing, readily accessible on the top of the cabi-
net and separate from the food zone to increase food
storage capacity. The entire "plug" system is fully
charged with environmentally safe R-404A refrigerant
and mounted on a sturdy steel, rail type base, which can
be easily removed if refrigerator conversion is desired.
Freezers are designed to maintain 0 degrees
Fahrenheit (-18 degrees Centigrade) while operating
with an unrestricted air supply in a maximum ambient
temperature of 100 degrees Fahrenheit. Automatic
electric defrost timer initiates defrost cycles at predeter-
mined intervals. All condensate water is evaporated by
an automatic, non-electric, corrosion-resistant conden-
sate evaporator. A strict quality-assurance team
inspects all materials and components to the most
exacting standards. All models are factory perform-
ance-tested for a minimum of 16 hours prior to crating.
CABINET CONSTRUCTION
All materials are of top quality, and are assem-
bled under rigid supervision conforming to strict
quality assurance requirements. The cabinet
front, doors, and interior bottoms, are con-
structed of heavy gauge polished stainless
steel for durability. All cabinet joints and seams
are sealed vapor tight. Case is of all metal
welded construction and is internally supported
and braced for rigid unit construction. Cabinet
design eliminates overlapping panels with raw
edges. Cabinet body and doors are insulated
with non-CFC, foamed in place polyurethane
foam with an average thickness of 3 inches to
ensure increased energy efficiency. Full-length
louvered air grille located above the doors
allows equal air circulation to the condensing
unit. Easily removable, low-wattage, anti-sweat
door heaters concealed by a non-metallic, non-
conductive, high-impact thermal breaker strip
eliminate condensate build up on the cabinet
front. Automatic interior lighting is controlled by
door openings. Cabinets are equipped with an
easily removable stainless steel ramp and inte-
rior rack guides.
DOOR CONSTRUCTION
Doors shells are constructed of a heavy
gauge stainless steel and are internally
braced and urethane foam insulated for
rigidity. Door corners are of welded con-
struction and polished. Replaceable
snap-in door gaskets are self-adjusting,
heavy-duty, magnetic type. Doors han-
dles and hinges are chrome-plated and
non-corrosive. Doors are provided with
built-in cylinder locks, which are keyed
alike. Hinges are cam action, lift-off type
featuring a positive safety stop at 120
degree.
DL3FI-SS
