DISPLAY
REFRIGERATORS
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Standard Features
• Modern, State-of-the-Art Styling
• Performance rated “Plug” Refrigeration System
Utilizing Environmentally Safe R-134a Refrigerant
• 3" Non-CFC Polyurethane Foam Insulation
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Magnetic Snap-In Door Gaskets
• Cabinet Upper Side Panels and Refrigeration “Plug”
System can be Easily Removed and Reinstalled at
Job-Site Where Space Limitations are Confining
• Cylinder Lock In Each Door
• Automatic Hot Gas Condensate Evaporator
• Refrigeration System is Readily Accessible on Top of
the Cabinet and Separate from the Food Zone
to Increase Food Storage Capacity
• Adjustable 6" Stainless Steel Legs
• Heavy-Duty, Epoxy-Coated Steel Shelves
• External Digital Thermometer
• Double-pane, Tempered Hinged Glass Doors
• Fluorescent Interior Lighting
Models Available
• Half Door
• Pass-Thru
• Remote
• Consult Factory
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
DL1R-SS-GD
DL2R-SS-GD
DL3R-SS-GD
Refrigeration System
A “Performance Rated”, air cooled, hermetically
sealed, capillary-type refrigeration system is installed
on the top of each refrigerator. Plasticized fin coil and
air circulating fans are contained within a concealed
“plug” type insulated housing, readily accessible on
top of the cabinet and separate from the food zone to
increase food storage capacity. The entire “plug” sys-
tem is fully charged with environmentally safe R-134a
refrigerant and mounted on a sturdy steel, rail-type
base which can be easily removed if freezer conver-
sion is desired. Refrigerators are designed to maintain
38 to 40 degrees Fahrenheit (3 to 5 degrees
Centigrade) while operating with an unrestricted air
supply in a maximum ambient temperature of 100
degrees Fahrenheit . All condensate water is evapo-
rated by an automatic non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify
that each model conforms to the most exacting stan-
dards. All models are factory performance tested for a
minimum of 16 hours prior to crating.
Cabinet Construction
All materials are of top quality, assembled to conform
with strict quality-assurance requirements. The cabi-
net front is constructed of heavy-gauge polished stain-
less steel for durability. All cabinet joints and seams
are sealed vapor-tight. Case is of all metal, welded
construction and internally supported and braced for a
rigid unit construction. Cabinet design eliminates over-
lapping panels with raw edges. Cabinet body is insu-
lated with non-CFC, foamed-in-place polyurethane
foam with an average thickness of 3 inches to ensure
increased energy efficiency. Full length louvered air
grille located above the doors allows equal air circula-
tion to the condensing unit. Easily removable, low
wattage, anti-sweat door heaters concealed by a non-
metallic, non-conductive, high-impact thermal breaker
strip eliminate condensate build-up on the cabinet
front. Fluorescent lighting is activated by an easily
accessible interior switch. Cabinets are equipped with
6-inch adjustable stainless steel legs.
Shelving
Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140" diame-
ter fill wires spaced
3
/
4
" apart. Shelves are welded steel
and epoxy-coated for a durable, long, rust-free service
life. Adjustments are in
1
/
2
" increments and a wide door
opening allows the use of a variety of optional pan and
tray slide types.
Door Construction
Double-pane tempered glass is encased by a heated,
heavy-duty aluminum extruded frame. Replaceable
snap-in door gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are chrome-
plated and non-corrosive. Doors are provided with
built-in cylinder locks which are keyed alike. Hinges
are cam-action, lift-off type featuring positive safety
stop at 120 degrees.
