WORKTOP
REFRIGERATED BASE
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Standard Features
• Stainless Steel Exterior and Interior
• Modern State-of-the-Art Styling Performance
Rated Refrigeration System Utilizing
Environmentally Safe R-134a Refrigerant
• Automatic, Energy Saving, Non-Electric
Condensate Disposal System
• High Density, Non-CFC Polyurethane Foamed-In-
Place Insulation
• Easily Accessible and Serviceable Front Slide-Out
Condensing Unit
• Completely Enclosed, Vented and Removable
Case Back
• Plasticized Fin Coil
• Capillary Dial Thermometer
• Chrome-Plated Hardware
• Reinforced Rigid Work Table
• One Piece Snap-In Magnetic Gaskets
• Adjustable 6" Stainless Steel Legs
Models Available
• DLRB42-SS
• DLRB92-SS
• DLRB42-SS-BS
• DLRB92-SS-BS
• DLRB67-SS
• DLRB117-SS
• DLRB67-SS-BS
• DLRB117-SS-BS
Optional Features & Accessories
• Remote Models–R
•Electric Condensate
• Interior Adjustable,
• Heavy-Duty, Self-
Removable Angle Sides
Closing External Roll-
• Heavy-Duty Pilasters
Out Drawers
•Stainless Steel Rear Cover • Wire Rod, Bun Tray
• Back Splash - BS
Racks
• Casters
Refrigeration System
The self-contained refrigeration system is mounted within
a side-housing, concealed behind a stainless steel lou-
vered grille. Full length air grille allows for even air circu-
lation to condensing unit. A “Performance Rated”, air-
cooled, hermetically sealed, capillary type refrigeration
system is installed in each model. Plasticized
finned coil and air circulating fans are contained within an
easily accessible, low profile ceiling mounted housing.
Our unique air flow design allows the cabinet to be
enclosed on both sides or, to be mounted flush against a
wall. Our refrigeration system, fully charged with R-134a
refrigerant, is designed to maintain 38
0
-40
0
Fahrenheit
while operating with an unrestricted air supply in an ambi-
ent temperature of 100
0
Fahrenheit. All condensate water
is directed to a non-electric condensate vaporizer located
in the compressor compartment, thus no plumbing is
required. A strict quality assurance team inspects all mate-
rials and components to certify that each model conforms
to the most exacting standards. All models are perform-
ance tested for a minimum of 16 hours prior to crating.
Cabinet Construction
All materials are of top quality, and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is of all metal welded
construction and is internally supported and braced for
rigid unit construction. Exterior cabinet back and bot-
tom are heavy gauge galvanized steel. Work top is
constructed of heavy gauge polished stainless steel
for durability. Cabinet design eliminates overlapping
panels with raw edges. Interior corners are rounded
with a 1/4" radius for cleaning ease. All cabinet joints
and seams are vapor-tight sealed. Easily removable
anti-sweat door heaters, concealed by a non-metallic,
non-conductive, high impact thermal breaker strip,
eliminates condensation build-up on case front.
Insulation
All cabinet walls, top, and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
Shelving
Shelves are designed for heavy-duty use with
.306" diameter frame and brace members and
.140" diameter fill wires spaced 3/4" apart.
Shelves are welded steel and epoxy-coated for a
durable, long, rust-free service life. Adjustments
are in 1/2" increments and a wide door opening
allows the use of a variety of optional pan and
tray slide types.
Door Construction
Door shells are constructed of heavy-gauge
stainless steel and are internally braced and ure-
thane-foam-insulated for rigidity. Door corners
are of welded construction and polished.
Replaceable snap-in door gaskets are self-
adjusting, heavy-duty, magnetic type. Door han-
dles and hinges are chrome-plated and non-cor-
rosive. Hinges are spring loaded, heavy duty,
self-closing.
DLRB42-SS
Shown w/ Optional
Drawers
DLRB67-SS-BS
