7
Step 1.
To lubricate the master die use the provided CrimpX Die Lubricant 3 oz
mini grease tube and a “flush type” grease coupling. (Mini grease gun is sold
separately).
Step 2.
Turn on the crimper, hold and press the green button or the pneumatic
switch to close the crimper to the “0” position.
Step 3.
Turn the valve in the “Hold” position, to keep the master dies closed.
Step 4.
Lubricate the master die through the 8 lubrication fittings.
Caution:
Failure to lubricate this area may result in premature wear and damage.
A molybdenum disulfide high pressure grease can be used as well.
PC150H Lubrication Procedure