How To Add a Saved Die
Up to 50 different dies can be saved in the computer
memory. These dies can be recalled in the set up
process eliminating the need to re-enter the die size
each time.
To enter a saved die:
•
From the OPTION screen, press SETUP MODE.
•
Select SAVED DIES.
•
Select the save position (1-50) where the die is to
be saved and press the EDIT button.
•
Enter a die description (up to 12 alpha/numeric
characters).
•
Enter diameter units (inch or metric).
•
Enter the closed diameter of the die.
•
Press SAVE and EXIT.
The saved die will now appear on the SELECTED DIE
screen. From this screen individual dies can be cleared
or edited.
How To Recall a Saved Die
•
Select CRIMP TO DIAMETER, and from the OPTION
screen, select USE SAVED DIE.
•
Select the saved die (1-50) and press LOAD and
then OK. The die parameters will now be used for
the crimp process.
•
From the ENTER CRIMP screen press MANUAL.
•
The saved die will now be shown on the crimp
parameters screen.
703 S. Cleveland Massillon Road, Fairlawn, OH 44333 I 800.234.4632 I www.contitech.us
