Special Tools and Supplies
Teledyne Continental Motors, Inc.
TM
3-38
IOF-550 Permold Series Engine Maintenance Manual
1 April 2007
Table 3-10.
Adhesives
TYPE APPLICATION
REMARKS
Through stud holes on accessory
end of crankcase
All 470, 520, 550 models (apply
when installing studs)
Manifold valve to bracket screws
All Models
Coolant pump impeller ring screws
All liquid cooled models
Studs .25 diameter and smaller
All Models
Loctite 222 Sealant (optional
Loctite Hydraulic Sealant 569) or
TCM P/N 646940-1
Data plate screws on manifold valve
assembly
All Models
Fuel pump adapter seal
All Models
P/N 654562-1 (50 ml)
P/N 654562-2 (250ml)
Loctite 609 Adhesive / Sealant
Fuel pump shaft seal
Loctite 620 Adhesive/Sealant
Coolant pump mechanical seal
All liquid cooled models
P/N 654743 / 3M Scotchcast 10
(XR5241) Epoxy
Epoxy field coil leads to starter
housing
24 Volt Starters
P/N 654470-1 / 3M Brand EC 1252
White Spot Seal Putty
Air throttle & fuel metering assembly
Magneto flanges
Cylinder deck stud nuts & all through
bolts
All fuel pump, manifold valve, throttle
and control fittings
All Models
P/N 655114-1 Adhesive Sealant
(Devcon)
Use for sealing aneroid air reference
path between basic fuel pump
housing and vapor separator body
(Setup only)
Fuel Pumps 646766, 646767 &
646824
P/N 649366 (Loctite 242)
Fitting Magneto Housing
(Pressurization)
Engine models as applicable
Table 3-11.
Miscellaneous
TYPE APPLICATION
REMARKS
TCM P/N 626531-1
Enamel - Gold (1qt)
TCM P/N 626531-2
Enamel - Gold (1 gal)
High temp. paint for cosmetic and
corrosion protection
TCM P/N 535011
Lockwire -.032 in dia. Steel,
Corrosion Resistant
Where safety wire is required
“ACCELAGOLD”
Turco® Products
Corrosion protection interior and
exterior aluminum parts
