Teledyne Continental Motors, Inc.
TM
Maintenance
Inspections
IOF-550 Permold Series Engine Maintenance Manual
7-59
1 April 2007
Table 7-11.
Cylinder Inspection Checklist
Engine Model Number: ___________________ Engine Serial Number: _________________
Total Time Engine Has Been in Service: _______________
Time Since Major Overhaul (TSMOH) __________________ Engine in Storage? ________
Date Inspection Performed: ________ Inspection Performed by:_____________________
Inspection Item
Inspector Comments
Complete the cylinder inspection according to the instructions in the Maintenance Manual; heeding all
warnings, cautions and notes. Place a check mark in the block to indicate completion of the inspection on each
cylinder. Note discrepancies in the Inspector Comments column.
Complete a visual inspection of the cylinder exterior and power
stroke areas for signs of cracks, leaks, rust or pitting (Section
7-3.8.1).
Cylinders
1
2
3
4
5
6
T
T
T
T
T
T
Complete a visual inspection of the cylinder head barrel, fins,
ports and bosses for evidence of fuel oil or soot (Section 7-
3.8.1).
Cylinders
1
2
3
4
5
6
T
T
T
T
T
T
Inspect the cylinder to crankcase mounting deck for visible
signs of RTV sealant (Section 7-3.8.4).
Cylinders
1
2
3
4
5
6
T
T
T
T
T
T
Differential Pressure Check (Section 7-3.8.2)
Baseline Master Orifice Calibrated Pressure
Reading:
Cylinder Pressure Reading
1
2
3
4
5
6
NOTES:
Page 1 of 3
