23
Thermostat
•
The thermostat knob controls the interior
temperature of the appliance.
•
The temperature selector knob is located
on the right hand inside wall of the re-
frigerator
OFF Setting: Unit is off.
MIN Setting: Generates the warmer
temperature.
MED Setting: This setting will provide a
normal operation temperature. Ad-
equate for most situations.
MAX Setting: Generates the coldest
temperature.
•
During high room temperatures e.g. on
hot summer days, it may be necessary to
set the thermostat to the coldest setting
(MAX). This could cause the compressor
to run continuously in order to maintain
a low temperature inside the cabinet.
Location of the refrigerator
•
Before installing the refrigerator, remove
all packaging materials including bottom
pads, foam pads and tapes inside the re-
frigerator. Remove the protective film on
the door and the refrigerator cabinet.
•
Keep the appliance away from heat
sources and avoid direct sunlight. Do not
place the freezer in moist or wet places
to prevent the formation of rust and the
reduction of its insulating properties.
•
When first installing your refrigerator, set
the thermostat knob at MED. Let the re-
frigerator time to cool down completely
before adding food. It is better to wait 24
hours before adding food.
•
When the thermostat control knob is set
to OFF, the refrigerator will not be run-
ning.
