audible science
audible science
WARNING
To prevent fire or shock
hazard, do not expose
this unit to rain or
moisture.
To avoid electrical shock,
do not open the cabinet.
Refer servicing to
qualified personnel only.
Precautions
On Safety
Should any solid object or liquid
fall into the cabinet, unplug the
unit and have it checked by your
Factory Authorized Consultant
On Power Sources
• Before operating the unit, check
that the operating voltage is
identical with your local power
supply. The operating voltage is
indicated on the name plate at
the rear of the unit.
• The unit is not disconnected
from the AC power source
(mains) as long as it is connected
to the wall outlet, even if the unit
itself has been turned off.
• If you are not going to use
the unit for a long time, be sure
to disconnect the unit from the
wall outlet. To disconnect the AC
power cord, grasp the plug itself;
never the cord.
• AC power cord must be changed
only at a qualified service shop.
On Placement
• Place the unit in a location with
adequate ventilation to prevent
heat buildup and prolong the life
of the unit.
• Do not place the unit near heat
sources, or in a place subject to
direct sunlight, excessive dust or
mechanical shock.
• Do not place anything near the
unit that might block ventilation
and cause malfunction.
On Operation
Before connecting to other
components, be sure to turn off
and unplug the unit.
On Cleaning
Clean cabinet, panels and
controls with a soft cloth slightly
moistened with a mild detergent
solution. Do not use any type of
abrasive pad, scouring powder
or solvent such as alcohol or
benzine.
If you have any questions or
problems concerning your
Caliburn turntable, please
contact your Authorized
Installation Consultant.
TABLE OF CONTENTS
OUR DESIGN PHILOSOPHY
................................. 6
CALIBURN’S COMPONENTS
................................. 8
INSTALLATION
Your Caliburn will be fully installed by your Authorised
Continuum Consultant ............................................ 10
OPERATING INSTRUCTIONS
Turntable record playing procedure ......................... 12
Vacuum Selection ................................................ 14
Turntable stopping procedure .................................. 16
Speed Selection .................................................... 18
Manual Turntable Speed Adjustment procedure ......... 20
Factory Speed Calibration value restore procedure. .... 24
OWNER CARE & MAINTENANCE
Cleaning Routine ................................................... 28
Scheduled Factory Service ...................................... 32
Faults & Trouble shooting ........................................ 34
THE CALIBURN’S DESIGN HISTORY
A brief history of how the Caliburn came to be. .......... 42
TABLE OF
CONTENTS
page 4
